The SS-11 is brother to the SS-20, but with added controls and increased flexibility. The SS-11 is available in two different versions, the A (Classic) and the B (Modern) versions. Both these versions have the same pedal layout, controls, and specifications; however the gain structure and voicing is slightly different between the two.
The SS-11B Modern version is designed to cover all the sounds of today's high gain tube amplifiers. Offering more distortion than the SS-11A, the SS-11B is a metal monster! The tone of the SS-11B (Modern) works perfectly for heavy riffing, drop tuned guitars, 7 strings, and screaming lead work.
Features of SS-11 Design:
Fully tube-based 4 - stage overdrive channel with DUAL TUBE design (2x12AH7 tubes) with high-voltage anode voltage (+300 V).
Three separate channels: CLEAN / OVERDRIVE / LEAD
Individual gain sensitivity and output level controls for clean and crunch/lead channels.
TREBLE SHIFT toggle switch to enter bright mode for that added punch of high end.
FX LOOP for external effects.
OUTPUT jack for connecting to both specialized guitar amplifiers with a standard level of 0 dB (GUITAR AMP mode) and a CAB SIM MIXER out with a standard level of -10dB and a guitar cabinet simulation.
The preamp outputs are equipped with sophisticated solid-state buffers.
SS-11 incorporates new field-effect transistor-based guitar cabinet impulse response emulator processing. Improved naturalness of sound when connected to line input.
Special attention was paid to transistors anode power quality: preamp uses a specially designed high-voltage transformer minimizing the penetration of impulse noises into amplified signal.
Description of SS-11 Channels:
LEAD channel provides thick viscous sound for playing both chunky rhythm parts and singing solos with excellent presence. TREBLE SHIFT toggle to take your lead sound into bright mode, for that extra grind and punch while drop tune riffing.
OVERDRIVE channel features a more open structure of the sound. This is the SS-11's sweet spot! VERY tubey and saturated sounding, much like that of the classic tube amps of the 70's and 80's! Wide range of sensitivity adjustment results in the sound starting from light crunch to thick and bright lead channel-like sound. Natural tube tone. If you're looking for something other than that dull sounding solid-state OD or TS clone sound, then THIS IS IT.
CLEAN channel focuses on crystal clarity clean sound. Low, Mid, and High controls for tweaking your sound; as well as and TREBLE SHIFT toggle for adjusting high end response.
Direct to Amplifier or Computer/DAW/Mixer
As all AMT pedals, the SS-11B is equipped with dual outputs. One for connection to a guitar amplifier, and one for direct connection to a computer, DAW, or mixing device. Into home or studio recording? Never again will you have to connect your mics, preamps, cables, and mic stands to get a great recorded guitar tone. Everything you need is built in to the SS-11. Simply choose the speaker simulated cabinet output, and you're ready to make professional studio-grade recordings with no extra effort!
Tubes: 12AH7 x 2
Input Impedance Rear Panel: 1MOhm
Input Sensitivity Rear Panel: -10dB
Output Impedance: 10kOhm
Power Voltage: 12vDC (-)center
Power Consumption: 600mA or .6A