Quickly becoming a legend known worldwide for it's AMAZING heavy metal style tube distortion. Incredible Clean, Overdrive, Distortion, and Lead tones in a compact tube valve driven pedal. This one is going to be finding its way onto lots of pedalboards and studio desks!
The Features of SS-20:
3 Channel Guitar Preamp
12AX7 Tube Preamp Section
Design for Ulta High Gain Tones
AMP OUT for output to amplifier
CAB EMULATED OUT for output to power armp, mixer, or computer
Inside the SS-20:
In order to achieve the full bodied tone of the SS-20, cascading triodes work in the "hottest" conditions to achieve the giant amplitude of one hundred or more volts. The dynamic properties characteristic to valve – based preamps are implemented in SS-20 due to the elimination of signal limiting OA (feed level of 20-25V) in the part of preliminary amplification and using special cascades capable of reaching 250V amplitude with nonlinearity similar to 12AX7 triode. Thus, we managed to achieve full dynamic characteristics of guitar signal without usual hybrid "squeeze" as well as assign special sound character to SS-20.
Special attention was also paid to clean channel – in this section we also followed the way of preserving the dynamics of guitar signal with simultaneous formation of soft "nonlinearity" inherent in the cascades on vacuum triodes. It also allowed us to escape both the unwanted "squeeze" and "refinement" found on many hybrid devices.
The Architecture of SS-20:
Two high-grade channels CLEAN and DRIVE with the possibility of Drive-channel operation in two basic modes: moderate sensitivity (CRUNCH) and high sensitivity (LEAD).
Effects Loop Send and Return.
Operation via both direct unaltered signal for guitar amplifiers heads, combos, and speakers (OUTPUT jack) as well as speaker cabinet compensated output for mixing consoles, computers, or other recording devices.
The basis of the inner preamp structure is the principle of maximum use of amplification and nonlinear transformation of the valve part of the device. Thus, the semi-conductor part of the hybrid practically does not participate in the sound limitation (except for the use of preamp in LEAD mode at Gain LEAD level of higher than 7) and the entire spectrum is formed by the valve preamp part. In the preamp stage the quantity of semi-conductor cascades is not used in the sound processing, and in the absence of jacks in SEND and RETURN the signal is forwarded to OUTPUT through compensating circuits directly from the output triode cascade. Therefore it is advised to use high quality minimum length cables for connecting the preamp output with guitar amplifier input.
The SS-20 uses AMT's legendary speaker modeling and offers this output via the CAB EMULATED jack. It models the amplitude-frequency characteristics of guitar amplification systems for the most accurate reproduction and ease of recording direct. Secondly, it simulates own nonlinearity of dynamic head peculiar to instrumental loudspeakers, that in its turn colors the output signal with short-range harmonics making it live and closer to real. Our unique speaker emulator circuitry supplements the signal with 2nd and 3rd harmonic with smooth increase in their level at signal level growth (it actually is similar to instrumental head in the closed cabinet), not found on other manufacturers pedals.
Power: External Adaptor AC 120V-240V 12V DC 1.25A
Tubes: 1 x 12AX7 - 12.6V (6.3V)
Anode Voltage: DC 290V
Jacks: Amplifier Output - for Combo Connection
Mixer Output - for Mixer/Recorder Connection
Effects Loop Send and Return
Bypass: Left F Switch - DRIVE effect on/off
Right F Switch - DISTORTION effect on/off