The Plush “Extreme Cream” pedal is a unique product, designed by Andy Fuchs. It uses a unique circuit topology which uses a combination of IC’s and selected FET’s, for lowest noise and the warmest tube like overdrive tones possible. This pedal incorporates a solid aluminum enclosure, a durable powder coated finish, premium passive components, metal shaft controls, and is backed by a five year warranty.
“Extreme Cream” is an easy to use dual channel overdrive pedal, which is easily dialed in for the widest range of overdrive tones. The two channels are identical in operation; however each channel is voiced slightly different, for greater tonal versatility. The left-hand footswitch changes channels, while the right-hand footswitch bypasses the pedal completely. When a guitar cable is plugged into the input jack, it powers the pedal. When the pedal is bypassed, the LED for the pre-selected channel will blink. This allows you to know which channel will become active when the pedal is engaged. When the pedal is engaged, the LED will stop blinking and switch to a solid color.
The Plush “Extreme Cream” provides a true hard wire bypass, which means when not in use (LED not lit) the input is connected directly to the output, with no loading of the signal, and no active devices in the signal path. This pedal may be driven by a Plush “Pure Gain” pedal to achieve higher levels of gain and distortion.
The DC jack on the side is a standard 2.1 mm tip negative adaptor input. A Plush DC adaptor may be purchased from your local dealer or any standard Roland style (or similar) DC adaptor may be used. The output of the adaptor must be 9-Volts DC. Using this pedal with the incorrect adaptor may potentially damage the pedal, which will not be covered under warranty
Dimensions: 5" x 5.75"