LINE 6 Tonecore Uber Metal

ber Metal brings you massive amounts of gain in one tiny, tough package. You can chose from some of the best Line 6 high-gain tones from HD147 and Vetta II including Metal, Pulverize, and Insane. Also included with the ber Metal is a built-in selectable noise gate, and scoop control for massive tonal contouring.


Model Switch - Give this a flick to reconfigure the destructive power of ber Metal.
Metal - creates screaming distortion, from heavy grind to molten metal! Bow down, infidels.

Pulverize - gives you a distortion similar to a high-gain tube amp. Mmmm, its warm and meaty!

Insane - has more skin-peeling gain and sustain than anything else available. For the inner Samurai-shredder in all of us.
Level - This sets the output level. Higher levels will hit the amp or effect fed by the ber Metal will more signal level, giving your more volume.

Mid & Scoop - Mid chooses a frequency from 250Hz to 4kHz. Scoop then removes sound at this frequency, with maximum scoop at the fully clockwise setting. Turn it fully counter-clockwise for a slight mid boost.

Drive - This controls the amount of distortion created within your ber Metal. Especially when you've got it set high, you may need to use the Gate to tame unwanted noise.

Bass & Treble - Bass and Treble are controls for your low and high frequencies.

Gate
Off - Disables the Gate.

Gate 1 - A soft and mild noise gate, self-adjusting to your current Drive knob setting.

Gate 2 - A heavy, fast-clamping gate. Great for those aggressive metal chords and palm muting.


Specs

Power Requirements
- Single 9-Volt Battery, or
- Line 6 DC-1 9-Volt DC Power Supply (buy it now)

Size & Weight:
- Width 3.375"
- Depth 5.625"
- Height 2.875"
- Weight 2lbs 4oz