MANLEY SPEQ Stereo Pultec EQ Equalizer Two Channel Stereo

WE CAN HELP 1-877-671-2200 | FREE SHIPPING - NO MINIMUM >> | SAVE 10% TODAY CLICK HERE >>
Cart is empty

MANLEY SPEQ Stereo Pultec EQ Equalizer Two Channel Stereo

prev next
Two channel stereo. PEQB and SPEQ offer transformer cupled balance output and direct capacitor coupled unbalanced outputs for easy interface and sonic

Item Condition: NEW (?)

Item SKU # MANLEY:SPEQ

It's Arriving Soon!

We've confirmed with Manley that this product is expected to arrive within a few weeks. Place your pre-order now to reserve yours, and your order will ship as soon as it arrives.


MSRP: $3,600.00

PAL Price: $3,240.00

 
Qty:

NEW This product is brand new with full factory warranty. We're including our 45-Day Satisfaction Guarantee to this New product, making it a no-risk purchase.

Details

The MANLEY ENHANCED PULTEC EQP-1A is our own interpretation of the historic Pultec Equalizer as originally produced by Pulse Techniques, Inc. They have been building these Manley Pultec EQs since 1990 after they bothered to hunt down Eugene Shenk in New Jersey to ask for his permission and blessings to produce their own version of the classic piece. These Manley Pultec units employ a simple and clean all-tube make-up gain block to reamplify the signal after the passive EQ circuit. EQ may be set to 'flat' positions or BYPASSED entirely. All BOOST and CUT controls are continuously variable conductive plastic potentiometers for absolutely silent operation and long life. Single rack unit monoblocks occupy one-third of the space of the 'antique Pultecs', an important consideration for allocation of outboard rack space. Manley added a couple extra frequencies too. The rear mounted input switch selects 0 degrees or 180 degrees PHASE INVERT for the balanced gold pin XLR input or the transformerless unbalanced bridging input (1/4" jack) may be selected in that switch's middle position.

 

The originals had three transformers in the signal path whereas ours can be used completely transformerless. The Manley Enhanced Pultec has a vastly superior B+ power supply, with regulated and balanced heater supply. The line amp is known to be killer-sounding. The components they use today just weren't available in the 1960's.

 

The MANLEY PULTEC EQP-1A, available in both single and 2-channel versions, uses 1 x 12AX7WA and 1 x 6414 (or 5965) in our ALL-TUBE single-ended line amplifier for the gain make-up and extra-beefy sound; gain is factory set for unity but additional gain is available by a rear mounted feedback adjustment trimpot. Like our 40dB Mic Preamps, the Manley Pultecs offer both transformer coupled balanced and direct capacitor coupled unbalanced outputs for easy interface and sonic variety. Kick drum? Bring on the Pultecs and all the iron you can muster! You'll soon discover the power and magic of having those individual Low Frequency BOOST and CUT controls in that LF shelf circuit. . . Need a little clarity or extension? Try that middle bell-shaped Boost dialing in the sharpness of the boost on the BANDWIDTH control. Something bugging you? Ease it off with the HF shelf cut. You'll see. There's no substitute for a what a Manley Pultec EQ can do!

 

  • MANLEY input transformer with nickel laminations potted in mu-metal case. 3K Ohm input Z
  • PHASE REVERSE switch for balanced XLR input
  • Alternate transformerless 1/4" HI-Z (5K Ohm) input
  • BYPASS switch & AUTO-MUTE w/warmup delay
  • Silent conductive plastic BOOST & CUT controls
  • Sealed gold-contact Greyhill frequency select switches
  • Vacuum Tubes: 1 x 12AX7WA (gain) and 1 x 6414 (or 5965) White Follower
  • Hi-current drive <50 Ohm LO-Z XLR & 1/4" outputs
  • Balanced Transformer-Coupled XLR Outputs via MANLEY 9611
  • Flat frequency response from 10Hz-70KHz
  • <0.01% THD @ 1kHz
  • S/N Ratio: 116 dB
  • Adjustable FEEDBACK / GAIN: Unity ±5 dB
  • Max. output: +30 dBv
  • Power consumption: 18 watts
  • Operating mains voltage: Units are purpose built for original destination country's mains voltage: 100V, 120V, or 220-240VAC as indicated on the serial number badge. Power transformer must be replaced in order to change mains operating voltage. 120VAC units may NOT be rewired to put the primaries of the power transformer in series for 220-240V operation or a large radiated field of hum will develop. If changing locations/voltages, the power transformer must be replaced with the dedicated one for the voltage at which it will operate.
  • Mains Voltage Frequency: 50~ 60Hz
  • Dimensions: 19" x 1 3/4" x 10" (occupies 1u)
  • Shipping weight: 12 lbs.

comments powered by Disqus

How do you rate this product? *

  1 star 2 stars 3 stars 4 stars 5 stars
Quality
Features
Value

You're reviewing: MANLEY SPEQ Stereo Pultec EQ Equalizer Two Channel Stereo

Share With Your Friends

3,240.00 In stock
MANLEY SPEQ Stereo Pultec EQ Equalizer Two Channel Stereo 0.0 out of 1 5 based on ratings. user reviews.

© 2016 ProAudioLand PAL. All Rights Reserved.