MANLEY TNT MTNT Mic Preamp

WE CAN HELP 1-877-671-2200 | FREE SHIPPING - NO MINIMUM >> | SAVE 10% TODAY CLICK HERE >>
Cart is empty

MANLEY TNT MTNT Mic Preamp

prev next
Two channels: SLAM mic preamp circuit and an immaculate solid-state mic preamp. Unique variable impedance control preforms gain make up.

Item Condition: NEW (?)

Item SKU # MANLEY:MTNT

It's Arriving Soon!

We've confirmed with Manley that this product is expected to arrive within a few weeks. Place your pre-order now to reserve yours, and your order will ship as soon as it arrives.


MSRP: $3,000.00

PAL Price: $2,700.00

 
Qty:

NEW This product is brand new with full factory warranty. We're including our 45-Day Satisfaction Guarantee to this New product, making it a no-risk purchase.

Details

There are a vast number of mic preamps available and today people choose Mic Preamps based on the sound and performance for particular sources, different mics and how those combinations work in individual songs. This approach is valid but tends to require at least 3 or 4 different stereo preamps (almost all are basic stereo) and that can be expensive when quality is involved and certainly overkill for most simple overdubs when we get the chance to choose the micpre. The Manley TNT is a new concept in microphone preamplification for those who don't always need stereo everything but often need choices and often need the best. Besides, you probably have a number of typical stereo preamps and are still looking for that one killer preamp.

 

Manley Labs saw a need for a different unit that truly offered a rainbow of high-end preamp colors at an affordable price. The "T" (Tubes) channel starts off with the highly acclaimed vacuum tube micpre from the SLAM! that is certainly a contender amongst the best cost-no-object tube preamps. The "NT" (No Tubes) channel adds a no-compromise solid-state preamp that sets new sonic standards. (Just trust us.) Because the solid-state side uses two opposite topologies in tandem that are user controllable, it is like getting two pre-amp 'sounds' on that side alone.

 

The MANLEY TNT is a remarkable and desirable tube preamp on one side and its equivalent in solid-state on the other side. These are not simulations, not samples, nor are they a clone or a toy. It is really good ol' analog done right.

 

Of course, all the usual front panel features: phantom power, phase switch, HP filters, LED overload and level indicators, and instrument inputs are there. Phantom is soft-switched and shunt regulated for lowest noise. (There are 6 low noise shunt regulators, and 5 standard regulators in the solid-state side). The High Pass Filter is a new approach, but suffice it to say that with it bypassed, the preamp is designed to have almost DC response (.01Hz) at all gain settings. The LED meter is set up to indicate first and second stage clipping, even though the output is capable of greater than +30 dBu (70 volts peak to peak into 50 Ohms from the solid-state side actually!). While we are tossing out numbers, both the current mode and voltage mode preamps sport EIN numbers of 130dB, very close to the theoretical minimum noise possible. So this thing is gravely quiet!

 


TUBE CHANNEL (LEFT CHANNEL)

  • Tube Channel Vacuum Tubes: 1 x 12AT7EH + 1 x NOS 6414 or 6414W
  • Gain Range: +10 dB to +80 dB (20 to 70dB in 5 dB steps)
  • Mic Input Impedance: 600, 2400, 10,000 Ohms
  • Instrument Input Impedance: 300K,1Meg, 3 Meg Ohms
  • Frequency Response: (-1 dB) 10 Hz to 30 kHz; (-3dB) 5 Hz to 45 kHz
  • THD & NOISE (1 kHz @ 20 dB gain): 0.035% typical (-68 dB)
  • Noise Floor: -60 dB typical referenced to +4dBm
  • EIN: -120 dB
  • Signal to Noise @ 70 dB Gain: 95dB (TRIM has major effect)
  • Maximum Output for 1% THD via BALANCED +4 XLR: 31 dBu COOL CHANNEL (Right or Solid State Channel)
  • Gain Range: +10 dB to +80 dB (20 to 70dB in 5 dB steps)
  • Mic Input Impedance: 300, 600, 2000, 2 Meg Ohms
  • Instrument Input Impedance: 100K, 300K,1Meg, 3 Meg, 10 Meg Ohms
  • Frequency Response: (-1 dB) 15 Hz to 30 kHz; (-3dB) 5 Hz to 50 kHz
  • THD & NOISE (1 kHz @ 20 dB gain): 0.01% typical (-80 dB) (no distortion products measurable, noise dominates measurement)
  • Noise Floor: -66 dB typical referenced to +4dBm
  • EIN: -126 dB
  • Signal to Noise @ 70 dB Gain: 85dB (TRIM has little effect)
  • Maximum Output for 1% THD:
  • via BALANCED +4 XLR: 30 dBu
  • via UNBALANCED +4 output: 24 dBu
  • via UNBALANCED -10 output: 16 dBu
  • Distortion @ 1K using 60' / 70's switch:
  • 1.5% typical with LED onset (+4 dBu out)
  • 3% typical with LED fully lit (+7 dBu out)

 

GENERAL

  • Power consumption: 30 watts
  • Operating mains voltage: Units' power transformers are wired for original destination country's mains voltage: 100V, 120V, or 220-240VAC as indicated on the serial number badge. Power transformer must be rewired on the pcb in order to change mains operating voltage. Fuse must be changed to appropriate value.
  • Mains Voltage Frequency: 50~ 60Hz
  • Fuse Values S/N up to MTNT142: @ 100 - 120V operation: 1A; @ 220 - 240V operation: 500mA
  • Fuse Values S/N after MTNT142: @ 100 - 120V operation: 500mA; @ 220 - 240V operation: 250mA
  • Fuse Size: 1/4" x 1 1/4" MDL or MDA SLO-BLO (time delay) type
  • Dimensions: 19" x 1 3/4" x 10" (occupies 1u)
  • Unit Weight: 11 lbs. Shipping Weight: 16 lbs. in a 22.5" x 14.5" x 8" BOX

comments powered by Disqus

How do you rate this product? *

  1 star 2 stars 3 stars 4 stars 5 stars
Value
Quality
Features

You're reviewing: MANLEY TNT MTNT Mic Preamp

Share With Your Friends

You may also be interested in the following product(s)

2,700.00 In stock
MANLEY TNT MTNT Mic Preamp 0.0 out of 1 5 based on ratings. user reviews.

© 2016 ProAudioLand PAL. All Rights Reserved.