Part of the Rocktron Boutique Series of stomp boxes this pedal design comes in a rugged metal chassis with eye popping retro custom design laser etched artwork. This is a TRUE BYPASS pedal: when you turn it off…it is out of your signal path!
The Dreamstar Chorus provides two independent chorus voice sections with separate LFO Modulators, making this one sweet chorus pedal!
Chorus Voice One offers three controls called Rate 1, Depth 1 and Dream 1. Rate 1 controls the speed of the LFO waveform used to modulate delay analog BBD delay line. Depth 1 determines the LFO’s maximum travel time and intensity. Dream 1 controls the amount of effect present in the summed output.
Chorus Voice Two offers three controls called Rate 2, Depth 2 and Dream 2. Rate 2 controls the speed of the LFO waveform used to modulate delay analog BBD delay line. Depth 2 determines the LFO’s maximum travel time and intensity. Dream 2 controls the amount of the effect present in summed output.
Chorus pedals usually sound best when placed after distortion in the signal chain. Thus, if you are using multiple stomp boxes, place the Dreamstar Chorus after your distortion. If using a variety of pedals, such as delays and other modulation effects, try the Dreamstar in different parts of the signal chain until you find the sound you like best.
If you have an effects loop in your amplifier, try putting the chorus in the effects loop for a different sound; (just follow the instructions in your amplifier manual when connecting to your effects loop). The footswitch on the Dreamstar Chorus controls On/Off status (indicated by the LED). This stomp box runs on a 9V Alkaline battery. You may also use the Rocktron DC OnTap Universal Power Adaptor.
- Maximum Input: 1.3dBu
- Maximum Output: -1.5Bu
- Input Impedance: 1 MOhm
- Output Impedance: 220 Ohms
- Current Consumption: 25mA
- Power Requirements: 9V Alkaline Battery or Rocktron DC OnTap Universal Power Supply (sold seperately)
- Dimensions: 3.75" x 4.75" x 2.25"
- Weight: 15.87 oz.