Tuners - Grover
ROTOMATICS WITH 18:1 GEAR RATIO (102-18 SERIES) The original Rotomaticﾮ with an improved higher ratio gearing. The 18:1 ratio provides for finer tuning and greater stability. The finer gears provide smoother tuning and a higher degree of backlash elimination.
Finger Board - Maple
Very bright and dense, Maple is highly reflective. When used on a fretboard, Maple encourages tremendous amounts of higher overtones and its tight, almost filtered away bass favors harmonics and variations in pick attack.
Pickups - Seymour Duncan SJAG-1
Every detail in sound, construction, and appearance is faithfully duplicated in this vintage pickup. Even the original hand grinding process is used on the magnetic pole pieces. The result is that classic '60s sound. Middle pickup is reverse wound, reverse polarity ("RW/RP") to create a hum canceling effect when used together with the bridge or neck pickup.
Neck - 3-pc Maple w/Carbon Fiber Reinforcement Rods
Made with 3 pieces of maple for extra stability. Where standard necks may show aging defects from temperature and moisture changes throughout the years, the 3 piece neck will stay nice and straight for a lifetime of playability. Two Carbon Fiber Rods are installed next to the Truss Rod for extra stability. Stronger than an equivalent volume of steel, Carbon Fiber adds little weight, but adds significant stiffness.
- Construction: Set Neck w/ Ultra Access
- Available Bodies: Mahogany
- Neck: 3-pc Maple w/Carbon Fiber Reinforcement Rods
- Finger Board: Maple
- Frets: 24X Jumbo
- Inlay: Black Pearl Stars & Moons
- Tuners: Grover
- Pickups: Seymour Duncan SJAG-1
- Electronics: Vol/Tone/3 On-Off Sliders
- Available Bridges: TonePros System w/Custom Brass Saddles
- Scale: 30"
- Hardware: Chrome
- Available Colors: Black (BLK)