The often imitated but never duplicated thunder of the Red Llama is back! This is not a reproduction, but a continuation of where the groundbreaking archetype left off in 1999. Every single feature that made the Red Llama so mighty is still in place, right where Mr. Huge left them. Season to taste any amp, big or small, clean or dirty the Llama is the perfect compliment to them all, with a rich harmonic palette available on the austere control panel. Spin the drive knob and go from a gentle grind all the way up to massive distortion. Use lower settings for defined open chording or juiced clean tones. Go a little higher for crunchy power fifths, and crank it up for buttery lead tones and tight, bottom-heavy riffage. The volume control sets the desired amount of overall level, but be forewarned: The output capabilities of the Red Llama are legendary, with more than enough gain to force even the cleanest, most stubborn amps to submit their headroom.
Power:The Red Llama Overdrive MkII can be powered by a single 9V battery, with a Dunlop ECB-003 external DC power supply, or with the Dunlop DC Brick. The power input is a 5.5mm x 2.1mm jack with the positive voltage on the outer sleeve. Using an external power supply will disconnect the battery. Disconnect the input jack to preserve battery life when not in use. The pedal will lock into bypass mode when it is time to change the battery. It also includes power protection circuitry to prevent damage from AC power supplies.
FEATURES: Heavy-duty footswitch with quiet relay-based true hardwire, blue LED indicator, 5.5mm x 2.1mm power jack, super-duty 0.09ﾔ aluminum anodized chassis, high grade components, great tone and cool name
- INPUT IMPEDANCE: 100 kOhms
- OUTPUT IMPEDANCE: < 10 kOhms
- SIGNAL TO NOISE: > 80 dBV
- GAIN RANGE: 20 dB
- BYPASS: True Hardwire Relay
- CURRENT DRAW: 15 mA
- POWER REQUIREMENT: 9 volts DC