ART DTI Dual Transformer Isolator Hum Eliminator

The DTI (Dual Transformer/Isolater) is a high quality totallypassive audio interface that uses a pair of high performancetransformers to totally separate input and output signal grounds,thereby isolating two systems and reducing hum and ground-loopnoise. The DTI's audio transformers have an extremely flat andwide frequency response and can handle high signal levels whilemaintaining an isolated balanced output. This gives the DTI a veryclean and neutral sound with a wide variety of signal sources. Thetransformers are wound for 1:1 unity gain and are designed to beused with impedances from 600 Ohms to 100k Ohms.

What further sets the DTI apart from other lesser isolation boxesis its connection versatility. We have provided XLR, 1/4ﾔ phone,and RCA type phono connections on all inputs and outputs. Thisallows it to easily fit into virtually any audio system and be theclean patch point between all types of systems.

Whether you need an interface between a computer based audioworkstation and your monitor system, isolation on long cable runsin a fixed installation, isolation of a signal source from yourrecording equipment, or in many cases, just a safer connectionbetween two audio systems, the DTI can accommodate.

The compact black anodized all aluminum case and itﾒs passivedesign allow the DTI to provide years of trouble free service inLive Sound, Permanent/Fixed Install, D.J., and virtually any PAapplication. Itﾒs full feature set, rugged construction, andhigh-end specifications make the DTI the obvious choice.

• requency Response: 10Hz-50kHz, +/-.5dB @ +4dBu
• THD: .01% Typical @ 1kHz, +18dBu, <.05% @ 100Hz, +24dBu
• Insertion Loss: .4dB @ 100k ohm load, 5.5dB @ 600 ohm load
• Input Connections: XLR female balanced, 1/4" TRS unbalanced,and RCA type phono jacks
• Output Connection: XLR male balanced, 1/4" TRS unbalanced, andRCA type phono jacks
• Power Requirements: Passive
• Dimensions (H x W x D): 1.75" x 4.2" x 3.5"
• Weight: .75 lbs