QUILTER LABS Bass Block 800 Amplifier w/ Bassliner 2x10 Wedge Cabinet

Cart is empty

QUILTER LABS Bass Block 800 Amplifier w/ Bassliner 2x10 Wedge Cabinet

prev next
Bass Block 800 Amplifier w/ Bassliner 2x10 Wedge Cabinet

Item Condition: NEW (?)

Item SKU # zz515-515-012

It's Arriving Soon!

This product is expected to arrive soon. Place your pre-order now to reserve yours, and your order will ship as soon as it arrives. If for any reason there are any delays we will inform you within 24 hours of placing your order.

MSRP: $1,949.00

PAL Price: $1,548.00


NEW This product is brand new with full factory warranty. We're including our 45-Day Satisfaction Guarantee to this New product, making it a no-risk purchase.


Built from the Ground up:

Built specifically for the bass guitar, the Bass Block 800 represents the culmination of years of research and development. Unlike many of today's compact bass amps, the Bass Block 800 is not simply an existing consumer-grade power module married to a pre-amp, but a comprehensive power system that responds dynamically and musically to the player’s instrument and touch.
Ultra-Light, Ultra-Strong:

The Bass Block is so light you might forget you are carrying it to the gig! Using an ultralight aluminum chassis, internal fan-cooled heat sink, and ferreting out every ounce possible, the Bass Block manages to pack 800 watts into a sturdy and insanely lightweight 4-lb package.
Real world power at any voltage:

Using high power technology developed for world-class pro audio touring, the Bass Block 800 delivers effortless reserves of power to maintain tight control of the speaker without clipping or bottoming out. The universal-voltage power supply delivers smooth and powerful response regardless of “club voltage” surges. The amp works on any voltage, anywhere. Plug it in, turn it up, enjoy the effortless beauty of the tone!
The most "musical" bass head ever?

Pat Quilter’s first amp was built in 1967 for his brother’s bass player, and great bass tone remains a key passion. The modern bass is a full-range instrument, with much different dynamic requirements than electric guitar. Low frequencies require more horsepower to move air, and the instrument demands percussive response without bottoming out or obtrusive limiting. The Bass Block provides 800 “real watts” to build on, and the preamp is optimized to make the best use of that power, providing more effective headroom with less stress on the speakers. Unique bass-specific EQ controls allow the bassist to quickly dial in a wide range of tones to match any instrument, and a special 2-stage limiter prevents bottoming out without suppressing dynamic response and feel. A Master control allows the peak power point to be adjusted to safely power any size of speaker, from giant stacks down to compact studio units. A prolonged field testing program has confirmed that every component in the Bass Block 800 is focused on creating the ultimate musical instrument for bass players. You will feel it every moment of every gig. Effortless, powerful, and exacting tone at your fingertips. The ultimate tool in your arsenal.


  • Power Output: 225 watts-16 Ohms, 450 watts-8 ohms, 800-watts, 4 ohms (2 Ohm use possible, but may experience clipping at high volume.)
  • AC Power Req.: 100–240Vac, 50–60 Hz, 250 W typical, 1000W peak.

Signal Connections:

  • PASSIVE INPUT: ¼" mono (full gain), 2 meg
  • ACTIVE INPUT: ¼" mono (-10dB gain), 30K
  • LINE INPUT: XLR 10K balanced, 1V full scale.
  • LINE OUTPUT: XLR, quasi-balanced, 400 ohms, 1V full scale


  • GAIN CONTROL MUTE BUTTON (with red warning LED)
  • DEPTH CONTROL (100Hz Hi-Q bass control)
  • CONTOUR CONTROL (Low-mid scoop, flat, treble cut)
  • MASTER CONTROL (adjusts peak power from 0 to 800W)
  • PILOT LIGHT (“winks” if the amplifier is driven into thermal limiting)

Speaker Connections:

  • 4-8 ohms, 90V, 25A peak
  • Dual ¼” jacks, 8 ohms each
  • Speakon (2 wire) 4-8 ohms.
  • Headphone Out:
  • 3.5mm mini-jack, 20 ohms per side, 2V peak.


  • H x W x D 8.5”(218mm) x 7.5” (190mm) x 3” (76mm)
  • Weight:
  • 3.7 lbs (2kg)

Approvals: UL recognized, tested to conform to FCC/CE limits for Class B devices.UL recognized, tested to conform to FCC/CE limits for Class B devices.

The Bassliner 2x10w is a sealed wedge cabinet featuring dual earth shaking 10 inch Eminence Deltalite II 2510 neodymium speakers paired with a powerful Eminence BGH25-8 horn. All Quilter Bassliner cabinets are constructed from ultra-light plywood to minimize every ounce of weight without sacrificing power or tone..

The Eminence BGH25-8 super tweeter is paired with the Bassliner driver to provide a smooth and efficient full range response. Paired with Quilter Labs integrated crossover network, it gives a natural and airy response.

Not your average guitar cabinet, Bassliner series cabs are constructed from durable plywood that is mysteriously lighter than anything you can find at your local hardware store. No expense was spared in crafting the ultimate professional solution.


CNC milled footcups to precisely locate amplifier in docking bay
Quick release thumbscrews let you detach your head for fly dates
Brushed, black anodized aluminum plate securely retains amplifier
High grade, ultra-light plywood for minimum weight
Cast aluminum large coil neodymium Eminence drivers
Powerful Eminence compression driver
Integrated heavy duty filter network
Chrome plated, rubber cushioned steel reinforced handle
T-5052 aircraft grade anodized aluminum alloy grill

How do you rate this product? *

  1 star 2 stars 3 stars 4 stars 5 stars

You're reviewing: QUILTER LABS Bass Block 800 Amplifier w/ Bassliner 2x10 Wedge Cabinet

Share With Your Friends

1,548.00 In stock
QUILTER LABS Bass Block 800 Amplifier w/ Bassliner 2x10 Wedge Cabinet 0.0 out of 1 5 based on ratings. user reviews.

© 2018 ProAudioLand PAL. All Rights Reserved.